Carbon Steel Hydrocyclone Water Filter for Sand & Solid Particles Removal
Product Name: Hydrocycl
PRODUCT DETAILS
简单介绍：
详情介绍：
Hydroclones - Ultra Efficient
A hydroclone is a device for separating a solid-liquid mixture during an industrial process by using a
conical vortex and centrifugal force. Depending on the application, we may use a hydroclone in a
system to provide primary stage filtration to remove larger particles before we pass the water to finer
levels of the filtration process.
The hydroclone uses cyclonic separation which is a method of removing particulates from a water
stream, without the use of filters, through vortex separation. Rotational effects and gravity are used
to separate mixtures of solids and fluids.
PRODUCT ADVANTAGES
Conical shape accelerates the velocity of the water increasing centrifical forces and maximizing separation.
Easy to operate and maintain with no moving parts or screens.
No headloss build-up or clogging during separation.
Specially designed rubber cone/insert protects the neck from erosion and increases separation.
Large holding capacity of sedimention tank reduces flushing frequency.
Maximum anti-corrosion protection with durable and long-lasting coating materials.
Working Principle
A high speed rotating water flow is established within a cylindrical or conical container called a cyclone. Air flows in a spiral pattern, beginning at the top (wide end) of the cyclone and ending at the bottom (narrow) end before exiting the cyclone in a straight stream through the center of the cyclone and out the top. Larger (denser) particles in the rotating stream have too much inertia to follow the tight curve of the stream and strike the outside wall, falling then to the bottom of the cyclone where they can be removed. In a conical system, as the rotating flow moves towards the narrow end of the cyclone the rotational radius of the stream is reduced, separating smaller and smaller particles. The cyclone geometry, together with flow rate, defines the cut point of the cyclone. This is the size of particle that will be removed from the stream with a 50% efficiency. Particles larger than the cut point will be removed with a greater efficiency, and smaller particles with a lower efficiency.
Technical parameters:
Model |
Flow rate (T/h) | Water inlet (mm) | Water outlet (mm) | Ø diameter (mm) | A1 (mm) | B1 (mm) | B2 (mm) | H1 (mm) | H2 (mm) | H3 (mm) |
YLXC–40Ⅰ | 25 | 40 | 25 | 273 | 220 | 113 | 220 | 640 | 140 | 860 |
YLXC–50Ⅰ | 40 | 50 | 25 | 273 | 220 | 108 | 230 | 680 | 140 | 910 |
YLXC–65Ⅰ | 50 | 65 | 25 | 325 | 220 | 124 | 240 | 780 | 140 | 1030 |
YLXC–80Ⅰ | 60 | 80 | 40 | 325 | 220 | 118 | 250 | 830 | 180 | 1095 |
YLXC–100Ⅰ | 100 | 100 | 40 | 377 | 220 | 134 | 260 | 920 | 200 | 1205 |
YLXC–125Ⅰ | 160 | 125 | 50 | 377 | 320 | 122 | 300 | 980 | 200 | 1310 |
YLXC–150Ⅰ | 200 | 150 | 50 | 478 | 380 | 150 | 360 | 1010 | 200 | 1410 |
YLXC–200Ⅰ | 250 | 200 | 50 | 620 | 440 | 200 | 430 | 1065 | 200 | 1550 |
YLXC–250Ⅰ | 300 | 250 | 65 | 720 | 500 | 225 | 520 | 1170 | 200 | 1750 |
YLXC–300Ⅰ | 500 | 300 | 65 | 820 | 580 | 274 | 590 | 1375 | 250 | 1990 |
APPLICATIONS
For separation of sand and other solid matter from water
Protection of valves and irrigation systems from damage/abrasion caused by sand and other solid matter
Pre-filtering of water with high loads of sand, disc and screen filters
FAQ:
01. What is the capacity (m3/hour)you required for this equipment?
02. What is the material for this cyclone filter?
Carbon steel ?or stainless steel (SS304/SS316)?
03. What is the power supply in your country?
220V/60Hz or other?